我有日程安排每日短期testing和每月长期testing，但今天我看到聪明卡在剩下10％的许多小时。 这是我的智能信息：
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-042stab103.6] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: MB1000GCEEK Serial Number: WCAW3LD6U8ZR LU WWN Device Id: 5 0014ee 2600b5075 Firmware Version: HPG1 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Fri Jun 30 13:52:41 2017 IRDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining. Total time to complete Offline data collection: (16500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 162) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 10 3 Spin_Up_Time 0x0027 178 178 021 Pre-fail Always - 4075 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 29 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20986 10 Spin_Retry_Count 0x0033 100 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0033 100 253 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 29 180 Unused_Rsvd_Blk_Cnt_Tot 0x002f 200 200 100 Pre-fail Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 072 054 045 Old_age Always - 28 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 27 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1 194 Temperature_Celsius 0x0022 119 101 000 Old_age Always - 28 195 Hardware_ECC_Recovered 0x0036 200 200 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 10% 20986 - # 2 Short offline Aborted by host 10% 20986 - # 3 Extended offline Interrupted (host reset) 40% 20985 - # 4 Short offline Aborted by host 10% 20983 - # 5 Short offline Completed without error 00% 20946 - # 6 Short offline Completed without error 00% 20922 - # 7 Short offline Completed without error 00% 20907 - # 8 Short offline Completed without error 00% 20877 - # 9 Short offline Completed without error 00% 20817 - #10 Short offline Completed without error 00% 20809 - #11 Short offline Completed without error 00% 20783 - #12 Short offline Completed without error 00% 20746 - #13 Short offline Completed without error 00% 20699 - #14 Short offline Completed without error 00% 20690 - #15 Short offline Completed without error 00% 20651 - #16 Short offline Completed without error 00% 20645 - #17 Short offline Completed without error 00% 20624 - #18 Short offline Completed without error 00% 20579 - #19 Short offline Completed without error 00% 20574 - #20 Short offline Completed without error 00% 20542 - #21 Short offline Completed without error 00% 20484 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. 任何想法为什么会发生 我也有同样的问题与我的另一台服务器具有相同的硬盘部件号，但经过一段时间，它通过，现在它工作正常！
我在等你的帮助。