“奇偶校验初始化状态：进行中”很长一段时间

两周前，我在“Smart Array P400”（RAM固件版本2.08）的“HP DL 380 G5”中安装了6个新硬盘（HP 500GB 6G 7.2K SFF 2.5英寸双端口SAS双端口中线507610-B21） ，ROM固件修订版2.08）。

我创build了一个新的逻辑磁盘，具有RAID 5中的5个物理磁盘和一个备用驱动器（arraysB）：

[…] => ctrl全部显示configuration

插槽1中的Smart Array P400（sn：P61620D9SUKHBP）

• HP MDS 600兼容性问题
• 不可纠正的机器检查
• 安装后不会显示RAID 1configuration
• vSphere ESXi – 在同一群集中同时使用HP ProLiant DL360 G7和DL360p Gen8
• HP DL585 G6和PCIE SSD

arraysA（SAS，未使用的空间：0 MB）

logicaldrive 1 (136.7 GB, RAID 1, OK) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 146 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 146 GB, OK) 

arraysB（SAS，未使用的空间：0 MB）

  logicaldrive 2 (1.8 TB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 500 GB, OK) physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS, 500 GB, OK) physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS, 500 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 500 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 500 GB, OK) physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS, 500 GB, OK, spare) 

[…]

 After that I could create the filesystem on It, mount It and use It without any issue. My problem is that One week later the controller still was initializing parity. 

arrays：B接口types：SAS未使用空间：0 MB状态：正常

  Logical Drive: 2 Size: 1.8 TB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Stripe Size: 64 KB Status: OK Array Accelerator: Enabled Parity Initialization Status: In Progress Unique Identifier: 600508B10010443953554B484250000C Disk Name: /dev/cciss/c0d1 Mount Points: /buzonesdir 1.8 TB OS Status: LOCKED Logical Drive Label: A0C36F2EP61620D9SUKHBPA42A 

[…]

 At that moment, trying to speed up the parity initialization, I increased the rebuild and expand priority from "medium" to "high". But, one week later (working with high priority) the "Parity Initialization Status" is still "In Progress". Do you know if this is normal and I should let It continue working? Do you know any way to check if really "Parity initialization" is being done and how long It will last? Thank you very much.