我正在使用CNTLM在我的Linux系统上设置代理服务器。 我编辑了cntlm.conf文件并进行了以下更改 –
# # Cntlm Authentication Proxy Configuration # # NOTE: all values are parsed literally, do NOT escape spaces, # do not quote. Use 0600 perms if you use plaintext password. # Username myusername Password mypasswordinplaintext # NOTE: Use plaintext password only at your own risk # Use hashes instead. You can use a "cntlm -M" and "cntlm -H" # command sequence to get the right config for your environment. # See cntlm man page # Example secure config shown below. # PassLM 1AD35398BE6565DDB5C4EF70C0593492 # PassNT 77B9081511704EE852F94227CF48A793 # # # Only for user 'testuser', domain 'corp-uk' # PassNTLMv2 D5826E9C665C37C80B53397D5C07BBCB # Specify the netbios hostname cntlm will send to the parent # proxies. Normally the value is auto-guessed. # # Workstation netbios_hostname # List of parent proxies to use. More proxies can be defined # one per line in format <proxy_ip>:<proxy_port> # Proxy 192.168.1.107:3128 # List addresses you do not want to pass to parent proxies # * and ? wildcards can be used # NoProxy localhost, 127.0.0.*, 10.*, 192.168.* # Specify the port cntlm will listen on # You can bind cntlm to specific interface by specifying # the appropriate IP address also in format <local_ip>:<local_port> # Cntlm listens on 127.0.0.1:3128 by default # Listen 192.168.34.95:8080 # If you wish to use the SOCKS5 proxy feature as well, uncomment # the following option. It can be used several times # to have SOCKS5 on more than one port or on different network # interfaces (specify explicit source address for that). # # WARNING: The service accepts all requests, unless you use # SOCKS5User and make authentication mandatory. SOCKS5User # can be used repeatedly for a whole bunch of individual accounts. # #SOCKS5Proxy 8010 #SOCKS5User dave:password # Use -M first to detect the best NTLM settings for your proxy. # Default is to use the only secure hash, NTLMv2, but it is not # as available as the older stuff. # # This example is the most universal setup known to man, but it # uses the weakest hash ever. I won't have it's usage on my # conscience. :) Really, try -M first. # #Auth LM #Flags 0x06820000 # Enable to allow access from other computers # #Gateway yes # Useful in Gateway mode to allow/restrict certain IPs # Specifiy individual IPs or subnets one rule per line. # #Allow 127.0.0.1 #Deny 0/0 # GFI WebMonitor-handling plugin parameters, disabled by default # #ISAScannerSize 1024 #ISAScannerAgent Wget/ #ISAScannerAgent APT-HTTP/ #ISAScannerAgent Yum/ # Headers which should be replaced if present in the request # #Header User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows 98) # Tunnels mapping local port to a machine behind the proxy. # The format is <local_port>:<remote_host>:<remote_port> # #Tunnel 11443:remote.com:443
现在，无论何时在本地系统上configurationFirefox的代理设置为192.168.34.95:3128 ，都会要求用户进行身份validation。 这不应该发生，因为我已经在authentication文件中保存了上游代理的密码。 我的防火墙被禁用，并检查cntlm的日志，我看到以下消息 –
section: global, Username = 'myusername' section: global, Password = 'passwordinplaintext' section: global, Proxy = '192.168.1.107:3128' section: global, NoProxy = 'localhost, 127.0.0.*, 10.*, 192.168.*' section: global, Listen = '192.168.34.95:8080' Resolve 192.168.34.95: -> 192.168.34.95 cntlm: Cannot bind port 8080: Address already in use! Adding no-proxy for: 'localhost' Adding no-proxy for: '127.0.0.*' Adding no-proxy for: '10.*' Adding no-proxy for: '192.168.*' cntlm: No proxy service ports were successfully opened. Exitting with error. Check daemon logs or run with -v.
我应该怎么做才能正确configurationcntlm ？