我在Ubuntu 12.04服务器上（在EC2上）configuration了openswan和xl2tpd，通过遵循各种 教程 / 文档 ，似乎在很大程度上说相同的东西，但最近这一个 。
但是，我尝试从Windows（我用共享密码和用户名/密码configuration）连接失败。 日志build议build立IPsec隧道，但没有任何反应。
这里是数据包转储和日志活动（没有发生在syslog中，所以没有iptables日志消息）：
$ sudo tcpdump -n host 64.236.139.254 and not port 22 21:00:49.843198 IP 64.236.139.254.26712 > 10.252.60.213.500: isakmp: phase 1 I ident 21:00:49.844815 IP 10.252.60.213.500 > 64.236.139.254.26712: isakmp: phase 1 R ident 21:00:49.928882 IP 64.236.139.254.26712 > 10.252.60.213.500: isakmp: phase 1 I ident 21:00:49.930819 IP 10.252.60.213.500 > 64.236.139.254.26712: isakmp: phase 1 R ident 21:00:49.972728 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 1 I ident[E] 21:00:49.973924 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 1 R ident[E] 21:00:50.000353 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:50.001429 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 21:00:50.030932 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:50.037256 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:50.055200 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 21:00:50.415676 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:50.415731 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:00:50.416605 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] 21:00:53.055631 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:53.060694 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 21:00:53.088162 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:53.088180 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:00:53.088437 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] 21:00:57.069750 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:57.070741 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 21:00:57.101194 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:00:57.101390 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:00:57.101817 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] 21:01:05.087873 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:01:05.089292 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 21:01:05.117423 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:01:05.117815 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:01:05.118026 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] 21:01:09.122471 IP 10.252.60.213.4500 > 64.236.139.254.26724: isakmp-nat-keep-alive 21:01:09.122664 IP 10.252.60.213.4500 > 64.236.139.254.26724: isakmp-nat-keep-alive 21:01:09.301582 IP 64.236.139.254.26724 > 10.252.60.213.4500: isakmp-nat-keep-alive 21:01:15.180248 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:01:15.181699 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 21:01:15.288574 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 21:01:15.288612 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:01:15.289452 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] 21:01:25.229928 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:01:25.230090 IP 64.236.139.254.26724 > 10.252.60.213.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 21:01:25.233650 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] 21:01:25.251769 IP 10.252.60.213.4500 > 64.236.139.254.26724: NONESP-encap: isakmp: phase 2/others R inf[E] $ tail -fn0 /var/log/syslog Feb 6 21:00:30 ip-10-252-60-213 kernel: [11977313.441315] device eth0 entered promiscuous mode $ tail -fn0 /var/log/auth.log Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: ignoring unknown Vendor ID payload [01528bbbc00696121849ab9a1c5b2a5100000001] Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000009] Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: received Vendor ID payload [RFC 3947] method set to=109 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: ignoring Vendor ID payload [FRAGMENTATION] Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: ignoring Vendor ID payload [Vid-Initial-Contact] Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26712: ignoring Vendor ID payload [IKE CGA version 1] Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: responding to Main Mode from unknown peer 64.236.139.254 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: OAKLEY_GROUP 20 not supported. Attribute OAKLEY_GROUP_DESCRIPTION Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: OAKLEY_GROUP 19 not supported. Attribute OAKLEY_GROUP_DESCRIPTION Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: STATE_MAIN_R1: sent MR1, expecting MI2 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): both are NATed Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: STATE_MAIN_R2: sent MR2, expecting MI3 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: Main mode peer ID is ID_IPV4_ADDR: '10.0.2.15' Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[15] 64.236.139.254 #50: switched from "L2TP-PSK-NAT" to "L2TP-PSK-NAT" Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: deleting connection "L2TP-PSK-NAT" instance with peer 64.236.139.254 {isakmp=#0/ipsec=#0} Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: new NAT mapping for #50, was 64.236.139.254:26712, now 64.236.139.254:26724 Feb 6 21:00:49 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp2048} Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: the peer proposed: 54.245.182.129/32:17/1701 -> 10.0.2.15/32:17/0 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: responding to Quick Mode proposal {msgid:01000000} Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: us: 10.252.60.213<10.252.60.213>[+S=C]:17/1701 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: them: 64.236.139.254[10.0.2.15,+S=C]:17/1701===10.0.2.15/32 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #51: STATE_QUICK_R2: IPsec SA established transport mode {ESP/NAT=>0xed4ff6b8 <0x9232de04 xfrm=AES_128-HMAC_SHA1 NATOA=10.0.2.15 NATD=64.236.139.254:26724 DPD=none} Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: the peer proposed: 54.245.182.129/32:17/1701 -> 10.0.2.15/32:17/1701 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: responding to Quick Mode proposal {msgid:02000000} Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: us: 10.252.60.213<10.252.60.213>[+S=C]:17/1701 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: them: 64.236.139.254[10.0.2.15,+S=C]:17/1701===10.0.2.15/32 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: keeping refhim=4294901761 during rekey Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #52: STATE_QUICK_R2: IPsec SA established transport mode {ESP/NAT=>0xb245cb36 <0x76292945 xfrm=AES_128-HMAC_SHA1 NATOA=10.0.2.15 NATD=64.236.139.254:26724 DPD=none} Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA(0xed4ff6b8) payload: deleting IPSEC State #51 Feb 6 21:00:50 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received and ignored informational message Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: the peer proposed: 54.245.182.129/32:17/1701 -> 10.0.2.15/32:17/1701 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: responding to Quick Mode proposal {msgid:03000000} Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: us: 10.252.60.213<10.252.60.213>[+S=C]:17/1701 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: them: 64.236.139.254[10.0.2.15,+S=C]:17/1701===10.0.2.15/32 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: keeping refhim=4294901761 during rekey Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #53: STATE_QUICK_R2: IPsec SA established transport mode {ESP/NAT=>0xb6953c9c <0x3331cb4f xfrm=AES_128-HMAC_SHA1 NATOA=10.0.2.15 NATD=64.236.139.254:26724 DPD=none} Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA(0xb245cb36) payload: deleting IPSEC State #52 Feb 6 21:00:53 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received and ignored informational message Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: the peer proposed: 54.245.182.129/32:17/1701 -> 10.0.2.15/32:17/1701 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: responding to Quick Mode proposal {msgid:04000000} Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: us: 10.252.60.213<10.252.60.213>[+S=C]:17/1701 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: them: 64.236.139.254[10.0.2.15,+S=C]:17/1701===10.0.2.15/32 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: keeping refhim=4294901761 during rekey Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #54: STATE_QUICK_R2: IPsec SA established transport mode {ESP/NAT=>0x2ca92f36 <0x86256756 xfrm=AES_128-HMAC_SHA1 NATOA=10.0.2.15 NATD=64.236.139.254:26724 DPD=none} Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA(0xb6953c9c) payload: deleting IPSEC State #53 Feb 6 21:00:57 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received and ignored informational message Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: the peer proposed: 54.245.182.129/32:17/1701 -> 10.0.2.15/32:17/1701 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: responding to Quick Mode proposal {msgid:05000000} Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: us: 10.252.60.213<10.252.60.213>[+S=C]:17/1701 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: them: 64.236.139.254[10.0.2.15,+S=C]:17/1701===10.0.2.15/32 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: keeping refhim=4294901761 during rekey Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #55: STATE_QUICK_R2: IPsec SA established transport mode {ESP/NAT=>0x8df1a782 <0x61eed691 xfrm=AES_128-HMAC_SHA1 NATOA=10.0.2.15 NATD=64.236.139.254:26724 DPD=none} Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA(0x2ca92f36) payload: deleting IPSEC State #54 Feb 6 21:01:05 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received and ignored informational message Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: the peer proposed: 54.245.182.129/32:17/1701 -> 10.0.2.15/32:17/1701 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: responding to Quick Mode proposal {msgid:06000000} Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: us: 10.252.60.213<10.252.60.213>[+S=C]:17/1701 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: them: 64.236.139.254[10.0.2.15,+S=C]:17/1701===10.0.2.15/32 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: keeping refhim=4294901761 during rekey Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #56: STATE_QUICK_R2: IPsec SA established transport mode {ESP/NAT=>0x021d5dde <0xc9c31f90 xfrm=AES_128-HMAC_SHA1 NATOA=10.0.2.15 NATD=64.236.139.254:26724 DPD=none} Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA(0x8df1a782) payload: deleting IPSEC State #55 Feb 6 21:01:15 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received and ignored informational message Feb 6 21:01:25 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA(0x021d5dde) payload: deleting IPSEC State #56 Feb 6 21:01:25 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: ERROR: netlink XFRM_MSG_DELPOLICY response for flow eroute_connection delete included errno 2: No such file or directory Feb 6 21:01:25 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received and ignored informational message Feb 6 21:01:25 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254 #50: received Delete SA payload: deleting ISAKMP State #50 Feb 6 21:01:25 ip-10-252-60-213 pluto[1464]: "L2TP-PSK-NAT"[16] 64.236.139.254: deleting connection "L2TP-PSK-NAT" instance with peer 64.236.139.254 {isakmp=#0/ipsec=#0} Feb 6 21:01:25 ip-10-252-60-213 pluto[1464]: packet from 64.236.139.254:26724: received and ignored informational message 之后似乎没有任何事情发生，Windows放弃了。
这里是我在客户端看到的数据包 – 我看到完全相同的数据包，所以没有任何东西被筛选出来：
$ sudo tcpdump -i wlan3 -n host $ip and not port 22 12:59:16.170388 IP 10.66.230.208.53383 > 54.245.182.129.500: isakmp: phase 1 I ident 12:59:16.197972 IP 54.245.182.129.500 > 10.66.230.208.53383: isakmp: phase 1 R ident 12:59:16.255396 IP 10.66.230.208.53383 > 54.245.182.129.500: isakmp: phase 1 I ident 12:59:16.282917 IP 54.245.182.129.500 > 10.66.230.208.53383: isakmp: phase 1 R ident 12:59:16.299043 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 1 I ident[E] 12:59:16.326840 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 1 R ident[E] 12:59:16.328144 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:16.357804 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 12:59:16.358888 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:16.362385 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:16.741818 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 12:59:16.743117 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:16.743396 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 12:59:16.769431 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R inf[E] 12:59:19.383010 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:19.414362 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 12:59:19.415559 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] ... 12:59:31.441952 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R oakley-quick[E] 12:59:31.443878 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:31.444124 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 12:59:31.476359 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R inf[E] 12:59:35.499825 IP 54.245.182.129.4500 > 10.66.230.208.53200: isakmp-nat-keep-alive 12:59:35.500068 IP 54.245.182.129.4500 > 10.66.230.208.53200: isakmp-nat-keep-alive 12:59:35.629175 IP 10.66.230.208.53200 > 54.245.182.129.4500: isakmp-nat-keep-alive 12:59:41.429705 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:41.534606 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R oakley-quick[E].537423 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E] 12:59:41.537675 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 12:59:41.642367 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R inf[E] 12:59:51.482628 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 12:59:51.482836 IP 10.66.230.208.53200 > 54.245.182.129.4500: NONESP-encap: isakmp: phase 2/others I inf[E] 12:59:51.587334 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R inf[E] 12:59:51.604347 IP 54.245.182.129.4500 > 10.66.230.208.53200: NONESP-encap: isakmp: phase 2/others R inf[E]
这是事态：
+ sudo ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.37/K3.2.0-37-virtual (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] + ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:fc:3c:d5 inet addr:10.252.60.213 Bcast:10.252.60.255 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fefc:3cd5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4803 errors:0 dropped:0 overruns:0 frame:0 TX packets:3147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:376849 (376.8 KB) TX bytes:628809 (628.8 KB) Interrupt:25 eth0:0 Link encap:Ethernet HWaddr 22:00:0a:fc:3c:d5 inet addr:172.22.1.1 Bcast:172.22.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:25 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) + sudo iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere LOG all -- anywhere anywhere LOG level warning prefix "blah blah: " + sudo egrep -v '^[[:space:]]*(#|$)' /etc/ipsec.conf version 2.0 # conforms to second version of ipsec.conf specification config setup dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:172.16.0.0/12 oe=off protostack=auto conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=10.252.60.213 leftprotoport=17/1701 right=%any rightprotoport=17/%any forceencaps=yes + sudo cat /etc/ppp/options.xl2tpd require-mschap-v2 ms-dns 8.8.8.8 ms-dns 8.8.4.4 asyncmap 0 auth crtscts lock hide-password modem debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4 + sudo cat /proc/sys/net/ipv4/ip_forward /proc/sys/net/ipv4/conf/*/{accept,send}_redirects 1 0 0 0 0 0 0 0 ==> /proc/sys/net/ipv4/conf/lo/send_redirects <== 0 + grep -v '^;' /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no debug avp = yes debug network = yes debug packet = yes debug state = yes debug tunnel = yes [lns default] ip range = 172.22.1.2-172.22.1.99 local ip = 172.22.1.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes + sudo cat /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc 10.252.60.213 %any: PSK "MYSHAREDSECRET" + sudo cat /etc/ppp/chap-secrets # client server secret IP addresses yang l2tpd MYPASSWORD *
那太糟糕了。
我find了解决scheme，最后我会看：客户端。 Windows默认不支持IPsec NAT-T，只要服务器位于NAT后面（如本例中那样），就会使用它。 您必须添加registry项才能启用此function – 请参阅http://support.microsoft.com/kb/926179/en-us （仍适用于Windows 8）。 那么一切正常。
我如何find它： 这个post ，我反过来发现从谷歌search的第二个openswan ipsec STATE_QUICK_R2: IPsec SA established transport mode ESP/NAT 。
在ipsec.conf中，左边需要不是你的公共IP，但是无论你的服务器看到什么IP，在这种情况下是10.252.194.250。 这样它可以“匹配”左侧/右侧的连接。 在哪里左=你，右=任何。
我有类似的问题。
我的服务器没有NAT，所以这件事是不需要的，所以删除它：
conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT
当这样做完成后，NAT Traversel必须设置为yes。
nat_traversal=yes