有一个带RAID的HS22刀片。 我删除了一个镜像磁盘，并用于其他，但现在我插回来，但它不会从工作磁盘同步。
cfggen显示如下：
cfggen_linux_i686_x86-64/cfggen 0 display LSI Logic IR Configuration Utility 2.06.00 Read configuration has been initiated for controller 0 ------------------------------------------------------------------------ Controller information ------------------------------------------------------------------------ Controller type : SAS1064E BIOS version : 6.30.00.00 Firmware version : 1.30.05.00 Channel description : 1 Serial Attached SCSI Initiator ID : 112 Maximum physical devices : 62 Concurrent commands supported : 277 Slot : 0 Bus : 11 Device : 0 Function : 0 RAID Support : Yes ------------------------------------------------------------------------ IR Volume information ------------------------------------------------------------------------ IR volume 1 Volume ID : 1 Status of volume : Degraded (DGD) RAID level : 1 Size (in MB) : 285148 Physical hard disks (Target ID) : 3 255 IR volume 2 Volume ID : 132 Status of volume : Inactive, Okay (OKY) RAID level : 1 Size (in MB) : 285148 ------------------------------------------------------------------------ Physical device information ------------------------------------------------------------------------ Initiator at ID #112 Target on ID #2 Device is a Hard disk Enclosure # : 1 Slot # : 1 Connector ID : 1 Target ID : 2 State : Online (ONL) Size (in MB)/(in sectors) : 286102/585937500 Manufacturer : IBM-ESXS Model Number : CBRCA300C3ETS0 Firmware Revision : C370 Serial No : Drive Type : SAS Protocol : SAS Target on ID #3 Device is a Hard disk Enclosure # : 1 Slot # : 0 Connector ID : 0 Target ID : 3 State : Online (ONL) Size (in MB)/(in sectors) : 286102/585937500 Manufacturer : IBM-ESXS Model Number : CBRCA300C3ETS0 Firmware Revision : C370 Serial No : PDVTTZME Drive Type : SAS Protocol : SAS ------------------------------------------------------------------------ Enclosure information ------------------------------------------------------------------------ Enclosure# : 1 Logical ID : 088306cc:5005076b Numslots : 4 StartSlot : 0 Start TargetID : 0 Start Bus : 0
该怎么办？
如果我把它从RAID1中分离出来了1个磁盘，那么它在另一个服务器上被打开，并最终回到原来的服务器：如果是这样的话，控制器可能会混淆在哪个主磁盘上镜像对方。
你能再次初始化应该接收数据的磁盘吗？ 这将清除该磁盘的RAID信息。