这里是-PDList -a0结果的一部分：
Enclosure Device ID: 252 Slot Number: 4 Drive's position: DiskGroup: 0, Span: 0, Arm: 0 Enclosure position: N/A Device Id: 12 Sequence Number: 3 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 931.512 GB [0x74706db0 Sectors] Non Coerced Size: 931.012 GB [0x74606db0 Sectors] Coerced Size: 931.0 GB [0x74600000 Sectors] Sector Size: 0 Firmware state: Failed Commissioned Spare : No Emergency Spare : No Device Firmware Level: A750 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x4433221104000000 Connected Port Number: 0(path0) Inquiry Data: DT01ACA100 MS2OA750 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature : N/A PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's NCQ setting : N/A Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a SMART alert : No 我正在使用LSI 9260-8i，当我尝试设置RAID 10时，它看起来一切正常，但是在重新启动后，从RAID卡开始发出蜂鸣声，MegaCli显示“Firmware state：Failed”（固件状态：失败）。 最奇怪的是，所有的错误计数是零，但它失败了。 我更新了RAID卡固件，但没有任何改变。
或者这是从一开始就打破了？