自定义Microtikconfiguration

总之，我试图加载到Microtik路由器的自定义RSCconfiguration

但是，在重新启动时加载它后：

/system reset-configuration no-defaults=yes run-after-reset=flash/vpn-regional-example.1.0.rsc 

我不再能够连接到路由器，它只是不断地说“validation和连接”

有没有人能够看到以下任何问题：

 # jun/29/2017 22:39:38 by RouterOS 6.34.4 # software id = NNIT-8400 # /interface bridge add auto-mac=yes comment=defconf name=bridge /interface ethernet set [ find default-name=ether2 ] name=ether2-master set [ find default-name=ether3 ] master-port=ether2-master set [ find default-name=ether4 ] master-port=ether2-master set [ find default-name=ether5 ] master-port=ether2-master /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce \ country=australia disabled=no distance=indoors frequency=auto mode=\ ap-bridge ssid=Example wireless-protocol=802.11 set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40mhz-Ce \ country=australia disabled=no distance=indoors frequency=auto mode=\ ap-bridge ssid=Example-5GHz wireless-protocol=802.11 /ip neighbor discovery set ether1 discover=no set bridge comment=defconf /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\ dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=myPassword123 \ wpa2-pre-shared-key=myPassword123 #/ip hotspot profile #set [ find default=yes ] html-directory=flash/hotspot /ip pool add name=dhcp ranges=192.168.89.10-192.168.89.254 /ip dhcp-server add address-pool=dhcp disabled=no interface=bridge name=defconf /ppp profile add name=ovpn use-encryption=yes /interface ovpn-client add certificate=vpn_key.pem_0 cipher=aes256 connect-to=vpn.example.org.au \ name=vpn.example.org.au password=\ PNqilt66P5RKoXbPpazq port=443 profile=ovpn user=vpn-regional-example /interface bridge port add bridge=bridge comment=defconf interface=ether2-master add bridge=bridge comment=defconf interface=wlan1 add bridge=bridge comment=defconf interface=wlan2 /ip address add address=192.168.89.1/24 comment=defconf interface=ether2-master network=\ 192.168.89.0 /ip dhcp-client add comment=defconf dhcp-options=hostname,clientid disabled=no interface=\ ether1 /ip dhcp-server network add address=192.168.89.0/24 comment=defconf gateway=192.168.89.1 /ip dns set allow-remote-requests=yes /ip dns static add address=192.168.89.1 name=router /ip firewall filter add chain=input comment="defconf: accept ICMP" protocol=icmp add chain=input comment="defconf: accept establieshed,related" \ connection-state=established,related add chain=input dst-port=22 log=yes log-prefix="remote-mgmt " protocol=tcp \ src-address=XXXX add chain=input dst-port=22 log=yes log-prefix="remote-mgmt " protocol=tcp \ src-address=XXXX add chain=input dst-port=22 log=yes log-prefix="remote-mgmt " protocol=tcp \ src-address=XXXX add chain=input dst-port=22 log=yes log-prefix="remote-mgmt " protocol=tcp \ src-address=XXXX add chain=input dst-port=22 log=yes log-prefix="remote-mgmt " protocol=tcp \ src-address=XXXX add chain=input dst-port=22 log=yes log-prefix="remote-mgmt " protocol=tcp \ src-address=XXXX add action=drop chain=input comment="defconf: drop all from WAN" \ in-interface=ether1 add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \ connection-state=established,related add chain=forward comment="defconf: accept established,related" \ connection-state=established,related add action=drop chain=forward comment="defconf: drop invalid" \ connection-state=invalid add action=drop chain=forward comment=\ "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \ connection-state=new in-interface=ether1 /ip firewall nat add action=masquerade chain=srcnat log=yes out-interface=vpn.example.org.au add action=masquerade chain=srcnat comment="defconf: masquerade" \ out-interface=ether1 /system clock set time-zone-name=Australia/Brisbane /system identity set name=vpn-regional-rockham /system ntp client set enabled=yes primary-ntp=XXXX secondary-ntp=XXXX /system routerboard settings set cpu-frequency=650MHz protected-routerboot=disabled /tool mac-server set [ find default=yes ] disabled=yes add interface=bridge /tool mac-server mac-winbox set [ find default=yes ] disabled=yes add interface=bridge /tool sniffer set filter-interface=vpn.example.org.au 

它将以Example的正确SSID重新启动