我安装freeradius2，添加到raddb / users：
test Cleartext-Password := "test1" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 10.36.0.2, Framed-IP-Netmask = 255.255.255.0, 开始半径，并检查身份validation：
radtest test test1 127.0.0.1 1002 testing123 Sending Access-Request of id 199 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test1" NAS-IP-Address = 127.0.0.1 NAS-Port = 1002 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=199, length=44 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 10.36.0.2 Framed-IP-Netmask = 255.255.255.0
工作正常。
下一步。 添加到mpd.conf：
radius: set auth disable internal set auth max-logins 1 CI set auth enable radius-auth set radius timeout 90 set radius retries 2 set radius server 127.0.0.1 testing123 1812 1813 set radius me 127.0.0.1 create link template L pppoe set link action bundle B set link max-children 1000 set link no multilink set link no shortseq set link no pap chap-md5 chap-msv1 chap-msv2 set link enable chap set pppoe acname Internet load radius create link template em1 L set pppoe iface em1 set link enable incoming
并尝试连接，身份validation失败，这里是mpd日志：
mpd: [em1-2] LCP: auth: peer wants nothing, I want CHAP mpd: [em1-2] CHAP: sending CHALLENGE #1 len: 21 mpd: [em1-2] LCP: LayerUp mpd: [em1-2] CHAP: rec'd RESPONSE #1 len: 58 mpd: [em1-2] Name: "test" mpd: [em1-2] AUTH: Trying RADIUS mpd: [em1-2] RADIUS: Authenticating user 'test' mpd: [em1-2] RADIUS: Rec'd RAD_ACCESS_REJECT for user 'test' mpd: [em1-2] AUTH: RADIUS returned: failed mpd: [em1-2] AUTH: ran out of backends mpd: [em1-2] CHAP: Auth return status: failed mpd: [em1-2] CHAP: Reply message: ^AE=691 R=1 mpd: [em1-2] CHAP: sending FAILURE #1 len: 14 mpd: [em1-2] LCP: authorization failed
然后我开始freeradius作为radiusd -fX，并得到这个日志：
rad_recv: Access-Request packet from host 127.0.0.1 port 46400, id=223, length=282 NAS-Identifier = "rubin.svyaz-nt.ru" NAS-IP-Address = 127.0.0.1 Message-Authenticator = 0x14d36639bed8074ec2988118125367ea Acct-Session-Id = "815965-em1-2" NAS-Port = 2 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "00e05290b3e3 / 00:e0:52:90:b3:e3 / em1" NAS-Port-Id = "em1" Vendor-12341-Attr-12 = 0x656d312d32 Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Client-Endpoint:0 = "00:e0:52:90:b3:e3" User-Name = "test" MS-CHAP-Challenge = 0xbb1e68d5bbc30f228725a133877de83e MS-CHAP2-Response = 0x010088746ae65b68e435e9d045ad6f9569b60000000000000000b56991b4f20704cb6c68e5982eec5e98a7f4b470c109c1b9 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok Found Auth-Type = MSCHAP # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: test [mschap] Client is using MS-CHAPv2 for test, we need NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Login incorrect: [test] (from client localhost port 2 cli 00e05290b3e3 / 00:e0:52:90:b3:e3 / em1) Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 223 to 127.0.0.1 port 46400 MS-CHAP-Error = "\001E=691 R=1"
为什么我有错误“[mschap]没有configurationCleartext-Password，无法创buildLM-Password。 ？ 我在用户中定义了cleartext-password。
我检查raddb / sites-enabled / default
authorize { chap mschap eap { ok = return } files }
看起来对我好。
mpd / chap / radius有什么问题？
[files] users: Matched entry DEFAULT at line 172
这不是在users文件中select你的条目。 您是否在“DEFAULT”开头的第一行之前插入了条目？ 我觉得你也需要==而不是=在检查项目，如下所示：
test Cleartext-Password := "test1", Service-Type == Framed-User, Framed-Protocol == PPP, Framed-IP-Address == 10.36.0.2, Framed-IP-Netmask == 255.255.255.0