eth0抓取ip分配给另一个接口随机在启动?
我有一台运行RHEL 5.6 32位的服务器。 服务器有十(10)个以太网接口: eth0: bootproto=static, onboot=yes, ipaddr=192.168.0.1, netmask=255.255.255.0 eth1: bootproto=static, onboot=yes (no IP is configured for this interface, see below) eth2-5: bootproto=none, onboot=yes (passive listening interfaces) eth6-9: bootproto=none, onboot=no (disabled) Eth1被用作两个networking的中继链路 – 我也configuration了两个VLAN接口: vlan620: vlan=yes, physdev=eth1, bootproto=static, ipaddr=172.16.37.4, netmask=255.255.255.240, gateway=172.16.37.1 vlan621: vlan=yes, physdev=eth1, bootproto=static, ipaddr=172.16.37.20, netmask=255.255.255.240, gateway=172.16.37.17 在任何时候,eth0都可以获取分配给vlan接口(172.16.37.4或.20)的一个IP地址 – 在启动时(networking服务启动时)或者networking服务重新启动时,或者随着系统运行。 这可能会破坏VLAN连接,因为这些是我们必须通过显示器和键盘运行的系统的唯一链接,通过使接口处于closures状态来解决这个问题。 这是一个问题,因为这个盒子坐在南美的一个服务器房间里:)至less有人能够提出是什么原因导致了这个问题? 编辑: 这里要求的是ls […]