puma init.d for centos 6失败，runuser：user /var/log/puma.log不存在

试图获得一个init.d /美洲狮工作在Centos 6.它会引发错误

runuser: user /var/log/puma.log does not exist 

我从/ srv / books / current文件夹运行它，但失败。 我试图debugging的值，但不完全得到什么是缺less的，为什么会抛出这个错误。

 #! /bin/sh # puma - this script starts and stops the puma daemon # # chkconfig: - 85 15 # description: Puma # processname: puma # config: /etc/puma.conf # pidfile: /srv/books/current/tmp/pids/puma.pid # Author: Darío Javier Cravero &lt;[email protected]> # # Do NOT "set -e" # Original script https://github.com/puma/puma/blob/master/tools/jungle/puma # It was modified here by Stanislaw Pankevich <[email protected]> # to run on CentOS 5.5 boxes. # Script works perfectly on CentOS 5: script uses its native daemon(). # Puma is being stopped/restarted by sending signals, control app is not used. # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/local/bin:/usr/local/sbin/:/sbin:/usr/sbin:/bin:/usr/bin DESC="Puma rack web server" NAME=puma DAEMON=$NAME SCRIPTNAME=/etc/init.d/$NAME CONFIG=/etc/puma.conf JUNGLE=`cat $CONFIG` RUNPUMA=/usr/local/bin/run-puma # Skipping the following non-CentOS string # Load the VERBOSE setting and other rcS variables # . /lib/init/vars.sh # CentOS does not have these functions natively log_daemon_msg() { echo "$@"; } log_end_msg() { [ $1 -eq 0 ] && RES=OK; logger ${RES:=FAIL}; } # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that performs a clean up of puma.* files # cleanup() { echo "Cleaning up puma temporary files..." echo $1; PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state SOCKFILE=$1/tmp/puma/puma.sock rm -f $PIDFILE $STATEFILE $SOCKFILE } # # Function that starts the jungle # do_start() { log_daemon_msg "=> Running the jungle..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/puma/config.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/puma/puma.log" fi do_start_one $dir $user $config_file $log_file done } do_start_one() { PIDFILE=$1/puma/puma.pid if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` # If the puma isn't running, run it, otherwise restart it. if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then do_start_one_do $1 $2 $3 $4 else do_restart_one $1 fi else do_start_one_do $1 $2 $3 $4 fi } do_start_one_do() { log_daemon_msg "--> Woke up puma $1" log_daemon_msg "user $2" log_daemon_msg "log to $4" cleanup $1; daemon --user $2 $RUNPUMA $1 $3 $4 } # # Function that stops the jungle # do_stop() { log_daemon_msg "=> Putting all the beasts to bed..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_stop_one $dir done } # # Function that stops the daemon/service # do_stop_one() { log_daemon_msg "--> Stopping $1" PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state echo $PIDFILE if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` echo "Pid:" echo $PID if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then log_daemon_msg "---> Puma $1 isn't running." else log_daemon_msg "---> About to kill PID `cat $PIDFILE`" # pumactl --state $STATEFILE stop # Many daemons don't delete their pidfiles when they exit. kill -9 $PID fi cleanup $1 else log_daemon_msg "---> No puma here..." fi return 0 } # # Function that restarts the jungle # do_restart() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_restart_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_restart_one() { PIDFILE=$1/tmp/puma/puma.pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to restart puma $1" # pumactl --state $dir/tmp/puma/state restart kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> Your puma was never playing... Let's get it out there first" user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi return 0 } # # Function that statuss then jungle # do_status() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_status_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_status_one() { PIDFILE=$1/tmp/puma/pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to status puma $1" pumactl --state $dir/tmp/puma/state stats # kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> $1 isn't there :(..." fi return 0 } do_add() { str="" # App's directory if [ -d "$1" ]; then if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then str=$1 else echo "The app is already being managed. Remove it if you want to update its config." exit 1 fi else echo "The directory $1 doesn't exist." exit 1 fi # User to run it as if [ "`grep -c "^$2:" /etc/passwd`" -eq 0 ]; then echo "The user $2 doesn't exist." exit 1 else str="$str,$2" fi # Config file if [ "$3" != "" ]; then if [ -e $3 ]; then str="$str,$3" else echo "The config file $3 doesn't exist." exit 1 fi fi # Log file if [ "$4" != "" ]; then str="$str,$4" fi # Add it to the jungle echo $str >> $CONFIG log_daemon_msg "Added a Puma to the jungle: $str. You still have to start it though." } do_remove() { if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then echo "There's no app $1 to remove." else # Stop it first. do_stop_one $1 # Remove it from the config. sed -i "\\:^$1:d" $CONFIG log_daemon_msg "Removed a Puma from the jungle: $1." fi } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_start else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_stop else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_stop_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) # TODO Implement. log_daemon_msg "Status $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_status else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_status_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; restart) log_daemon_msg "Restarting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_restart else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_restart_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; add) if [ "$#" -lt 3 ]; then echo "Please, specifiy the app's directory and the user that will run it at least." echo " Usage: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." exit 1 else do_add $2 $3 $4 $5 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; remove) if [ "$#" -lt 2 ]; then echo "Please, specifiy the app's directory to remove." exit 1 else do_remove $2 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; *) echo "Usage:" >&2 echo " Run the jungle: $SCRIPTNAME {start|stop|status|restart}" >&2 echo " Add a Puma: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." echo " Remove a Puma: $SCRIPTNAME remove /path/to/app" echo " On a Puma: $SCRIPTNAME {start|stop|status|restart} PUMA-NAME" >&2 exit 3 ;; esac : 

puma.conf

 # /etc/init/puma.conf - Puma config # This example config should work with Ubuntu 12.04+. It # allows you to manage multiple Puma instances with # Upstart, Ubuntu's native service management tool. # # See workers.conf for how to manage all Puma instances at once. # # Save this config as /etc/init/puma.conf then manage puma with: # sudo start puma app=PATH_TO_APP # sudo stop puma app=PATH_TO_APP # sudo status puma app=PATH_TO_APP # # or use the service command: # sudo service puma {start,stop,restart,status} # description "Puma Background Worker" # no "start on", we don't want to automatically start stop on (stopping puma-manager or runlevel [06]) # change apps to match your deployment user if you want to use this as a less privileged user (recommended!) setuid deploy setgid deploy respawn respawn limit 3 30 instance ${app} script # this script runs in /bin/sh by default # respawn as bash so we can source in rbenv/rvm # quoted heredoc to tell /bin/sh not to interpret # variables exec /bin/bash <<'EOT' # set HOME to the setuid user's home, there doesn't seem to be a better, portable way export HOME="$(eval echo ~$(id -un))" cd $app if [ -d "$HOME/.rbenv/bin" ]; then export PATH="$HOME/.rbenv/bin:$PATH" elif [ -f /etc/profile.d/rvm.sh ]; then source /etc/profile.d/rvm.sh elif [ -f /usr/local/rvm/scripts/rvm ]; then source /etc/profile.d/rvm.sh elif [ -f "$HOME/.rvm/scripts/rvm" ]; then source "$HOME/.rvm/scripts/rvm" elif [ -f /usr/local/share/chruby/chruby.sh ]; then source /usr/local/share/chruby/chruby.sh if [ -f /usr/local/share/chruby/auto.sh ]; then source /usr/local/share/chruby/auto.sh fi # if you aren't using auto, set your version here # chruby 2.0.0 fi logger -t puma "Starting server: $app" exec bundle exec puma -C config/puma.rb EOT end script 

• 收到低分的邮件，但算作垃圾邮件？
• mod_deflate，centos，application / x-httpd-php
• chroot问题，破pipe
• 出站HTTPstream量被APF阻止 – 出站filterclosures
• 这个RAIDarrays的启动安装有什么问题？