我有64位64位的centos。 snmpd工作不正常：当我重新启动时，我得到以下
Nov 18 12:43:31 hector kernel: CIFS VFS: No task to wake, unknown frame received! NumMids 58 Nov 18 12:43:31 hector kernel: CIFS VFS: No task to wake, unknown frame received! NumMids 58 Nov 18 12:43:31 hector kernel: netlink: 12 bytes leftover after parsing attributes. Nov 18 12:43:31 hector snmpd[16487]: mibII/mta_sendmail.c:open_sendmailst: could not guess version of statistics file "/var/log/mail/statistics" Nov 18 12:43:31 hector snmpd[16489]: NET-SNMP version 5.5 OUPUT
[root@hector ~]# /usr/sbin/snmpd -Dmib_init -I -mta_sendmail -H No log handling enabled - turning on stderr logging registered debug token mib_init, 1 mib_init: initializing: smux mib_init: initializing: usmConf mib_init: initializing: iquery mib_init: initializing: vacm_conf mib_init: initializing: diskio mib_init: skipping: mta_sendmail mib_init: initializing: ipAddressPrefixTable mib_init: initializing: ipAddressPrefixTable mib_init: initializing: ipDefaultRouterTable mib_init: initializing: ipDefaultRouterTable mib_init: initializing: lmsensorsMib mib_init: initializing: hr_swinst mib_init: initializing: hr_swrun mib_init: initializing: hr_system mib_init: initializing: hr_device mib_init: initializing: hr_other mib_init: initializing: hr_proc mib_init: initializing: hr_network mib_init: initializing: hr_print mib_init: initializing: hr_disk mib_init: initializing: hr_partition mib_init: initializing: hrh_storage mib_init: initializing: hrh_filesys mib_init: initializing: ipv4InterfaceTable mib_init: initializing: ifTable mib_init: initializing: ipv4InterfaceTable mib_init: initializing: ipv6InterfaceTable mib_init: initializing: ifXTable mib_init: initializing: ipv6InterfaceTable mib_init: initializing: ipAddressTable mib_init: initializing: ipAddressTable mib_init: initializing: ipv6ScopeZoneIndexTable mib_init: initializing: ipv6ScopeZoneIndexTable mib_init: initializing: ipIfStatsTable mib_init: initializing: ipIfStatsTable mib_init: initializing: sctpScalars mib_init: initializing: tcpConnectionTable mib_init: initializing: tcpConnectionTable mib_init: initializing: tcpListenerTable mib_init: initializing: tcpListenerTable mib_init: initializing: udpEndpointTable mib_init: initializing: udpEndpointTable mib_init: initializing: interface mib_init: initializing: ifTable mib_init: initializing: sctpAssocRemAddrTable mib_init: initializing: sctpAssocLocalAddrTable mib_init: initializing: sctpLookupLocalPortTable mib_init: initializing: sctpLookupRemPortTable mib_init: initializing: sctpLookupRemHostNameTable mib_init: initializing: sctpLookupRemPrimIPAddrTable mib_init: initializing: sctpLookupRemIPAddrTable mib_init: initializing: sctpAssocTable mib_init: initializing: etherStatsTable mib_init: initializing: etherStatsTable mib_init: initializing: dot3StatsTable mib_init: initializing: dot3StatsTable mib_init: initializing: hw_sensors mib_init: initializing: snmpMPDStats_5_5 mib_init: initializing: usmStats_5_5 mib_init: initializing: snmpEngine mib_init: initializing: usmUser mib_init: initializing: snmp_mib_5_5 mib_init: initializing: system_mib mib_init: initializing: sysORTable mib_init: initializing: at mib_init: initializing: ip mib_init: initializing: tcp mib_init: initializing: icmp mib_init: initializing: udp mib_init: initializing: vacm_vars mib_init: initializing: setSerialNo mib_init: initializing: ipv6 mib_init: initializing: proc mib_init: initializing: versioninfo mib_init: initializing: pass mib_init: initializing: pass_persist mib_init: initializing: disk mib_init: initializing: loadave mib_init: initializing: extend mib_init: initializing: errormib mib_init: initializing: file mib_init: initializing: dlmod mib_init: initializing: proxy mib_init: initializing: logmatch mib_init: initializing: memory mib_init: initializing: vmstat mib_init: initializing: snmpNotifyTable mib_init: initializing: snmpNotifyFilterProfileTable mib_init: initializing: notification_log mib_init: initializing: target_counters_5_5 mib_init: initializing: snmpTargetAddrEntry mib_init: initializing: snmpTargetParamsEntry mib_init: initializing: nsTransactionTable mib_init: initializing: nsModuleTable mib_init: initializing: nsDebug mib_init: initializing: nsCache mib_init: initializing: nsLogging mib_init: initializing: nsVacmAccessTable mib_init: initializing: mteScalars mib_init: initializing: mteTrigger mib_init: initializing: mteTriggerTable mib_init: initializing: mteTriggerDeltaTable mib_init: initializing: mteTriggerExistenceTable mib_init: initializing: mteTriggerBooleanTable mib_init: initializing: mteTriggerThresholdTable mib_init: initializing: mteTriggerConf mib_init: initializing: mteEvent mib_init: initializing: mteEventTable mib_init: initializing: mteEventSetTable mib_init: initializing: mteEventNotificationTable mib_init: initializing: mteEventConf mib_init: initializing: mteObjects mib_init: initializing: mteObjectsTable mib_init: initializing: mteObjectsConf mib_init: initializing: schedCore mib_init: initializing: schedConf mib_init: initializing: schedTable mib_init: initializing: override mib_init: initializing: cpu mib_init: initializing: cpu_linux mib_init: initializing: hw_mem mib_init: initializing: hw_fsys mib_init: initializing: var_route mib_init: initializing: tcpTable mib_init: initializing: udpTable mib_init: initializing: vacm_context mib_init: initializing: ip_scalars mib_init: initializing: snmpNotifyFilterTable mib_init: initializing: snmpNotifyFilterTable mib_init: initializing: ifXTable mib_init: initializing: inetNetToMediaTable mib_init: initializing: inetNetToMediaTable mib_init: initializing: ipSystemStatsTable mib_init: initializing: ipSystemStatsTable mib_init: initializing: ipCidrRouteTable mib_init: initializing: ipCidrRouteTable mib_init: initializing: inetCidrRouteTable mib_init: initializing: inetCidrRouteTable Configuration directives understood: In snmpd.conf and snmpd.local.conf: authtrapenable 1 | 2 (1 = enable, 2 = disable) trapsink host [community] [port] trap2sink host [community] [port] informsink host [community] [port] trapsess [snmpcmdargs] host trapcommunity community-string v1trapaddress string agentuser userid agentgroup groupid agentaddress SNMP bind address quit (1|yes|true|0|no|false) leave_pidfile (1|yes|true|0|no|false) dontLogTCPWrappersConnects (1|yes|true|0|no|false) maxGetbulkRepeats integerValue maxGetbulkResponses integerValue injectHandler injectHandler NAME INTONAME [BEFORE_OTHER_NAME] table tableoid add_row table_name indexes... values... agentxsocket AgentX bind address master specify 'agentx' for AgentX support agentxperms AgentX socket permissions: socket_perms [directory_perms [username|userid [groupname|groupid]]] agentxRetries AgentX Retries agentxTimeout AgentX Timeout (seconds) com2sec [-Cn CONTEXT] secName IPv4-network-address[/netmask] community com2sec6 [-Cn CONTEXT] secName IPv6-network-address[/netmask] community com2secunix [-Cn CONTEXT] secName sockpath community perl PERLCODE perlInitFile string disablePerl (1|yes|true|0|no|false) smuxpeer OID-IDENTITY PASSWORD smuxsocket SMUX bind address createUser username [-e ENGINEID] (MD5|SHA) authpassphrase [DES [privpassphrase]] agentSecName string iquerySecName string iqueryVersion 1 | 2c | 3 iquerySecLevel noAuthNoPriv | authNoPriv | authPriv group name v1|v2c|usm|... security access name context model level prefix read write notify setaccess name context model level prefix viewname viewval view name type subtree [mask] authcommunity authtype1,authtype2 community [default|hostname|network/bits [oid|-V view]] authuser authtype1,authtype2 [-s secmodel] user [noauth|auth|priv [oid|-V view]] authgroup authtype1,authtype2 [-s secmodel] group [noauth|auth|priv [oid|-V view]] authaccess name authtype1,authtype2 [-s secmodel] group view [noauth|auth|priv [context|context*]] rwcommunity community [default|hostname|network/bits [oid]] rocommunity community [default|hostname|network/bits [oid]] rwcommunity6 community [default|hostname|network/bits [oid]] rocommunity6 community [default|hostname|network/bits [oid]] rwuser user [noauth|auth|priv [oid]] rouser user [noauth|auth|priv [oid]] ignoredisk name skipNFSInHostResources (1|yes|true|0|no|false) realStorageUnits (1|yes|true|0|no|false) storageUseNFS 1 | 2 (1 = enable, 2 = disable) interface_fadeout interface_fadeout seconds interface_replace_old interface_replace_old yes|no interface name type speed sysdescr description syslocation location syscontact contact-name sysname node-name sysservices NUMBER sysobjectid OID setserialno integer proc process-name [max-num] [min-num] procfix process-name program [arguments...] pass miboid command pass_persist miboid program disk path [ minspace | minpercent% ] includeAllDisks minpercent% load max1 [max5] [max15] file file [maxsize] dlmod module-name module-path proxy [snmpcmd args] host oid [remoteoid] logmatch logmatch name path cycletime regex swap min-avail dontRetainLogs (1|yes|true|0|no|false) doNotRetainNotificationLogs (1|yes|true|0|no|false) monitor triggername [-I] [-i OID | -o OID]* [-e event] expression defaultMonitors yes|no linkUpDownNotifications yes|no notificationEvent eventname notifyOID [-m] [-i OID|-o OID]* setEvent eventname [-I] OID = value strictDisman (1|yes|true|0|no|false) repeat repeat period OID = value cron cron * * * * * OID = value at at * * * * * OID = value override [-rw] mibnode type value defDomain application domain defTarget application domain target engineID string engineIDType num engineIDNic string In snmp.conf and snmp.local.conf: alias NAME TRANSPORT_DEFINITION doDebugging (1|0) debugTokens token[,token...] logTimestamp (1|yes|true|0|no|false) mibdirs [mib-dirs|+mib-dirs|-mib-dirs] mibs [mib-tokens|+mib-tokens] mibfile mibfile-to-read showMibErrors (1|yes|true|0|no|false) commentToEOL (1|yes|true|0|no|false) strictCommentTerm (1|yes|true|0|no|false) mibAllowUnderline (1|yes|true|0|no|false) mibWarningLevel integerValue mibReplaceWithLatest (1|yes|true|0|no|false) printNumericEnums (1|yes|true|0|no|false) printNumericOids (1|yes|true|0|no|false) escapeQuotes (1|yes|true|0|no|false) dontBreakdownOids (1|yes|true|0|no|false) quickPrinting (1|yes|true|0|no|false) numericTimeticks (1|yes|true|0|no|false) oidOutputFormat integerValue suffixPrinting integerValue extendedIndex (1|yes|true|0|no|false) printHexText (1|yes|true|0|no|false) printValueOnly (1|yes|true|0|no|false) dontPrintUnits (1|yes|true|0|no|false) hexOutputLength integerValue dumpPacket (1|yes|true|0|no|false) reverseEncodeBER (1|yes|true|0|no|false) defaultPort integerValue defCommunity string noTokenWarnings (1|yes|true|0|no|false) noRangeCheck (1|yes|true|0|no|false) persistentDir string tempFilePattern string noDisplayHint (1|yes|true|0|no|false) 16bitIDs (1|yes|true|0|no|false) clientaddr string clientaddrUsesPort (1|yes|true|0|no|false) serverSendBuf integerValue serverRecvBuf integerValue clientSendBuf integerValue clientRecvBuf integerValue noPersistentLoad (1|yes|true|0|no|false) noPersistentSave (1|yes|true|0|no|false) noContextEngineIDDiscovery (1|yes|true|0|no|false) defDomain application domain defTarget application domain target defSecurityModel string defSecurityName string defContext string defPassphrase string defAuthPassphrase string defPrivPassphrase string defAuthMasterKey string defPrivMasterKey string defAuthLocalizedKey string defPrivLocalizedKey string defVersion 1|2c|3 defAuthType MD5|SHA defPrivType DES|AES defSecurityLevel noAuthNoPriv|authNoPriv|authPriv In agentx.conf and agentx.local.conf: agentxsocket AgentX bind address agentxperms AgentX socket permissions: socket_perms [directory_perms [username|userid [groupname|groupid]]] agentxRetries AgentX Retries agentxTimeout AgentX Timeout (seconds)
如果你不需要监听sendmail的snmp，你可以在启动时禁用一个合适的模块。
使用"-I -mta_sendmail"选项：
snmpd -I -mta_sendmail