什么是Cisco IOS(CLI)命令显示WAP的无线电MAC地址?

我无法相信我无法通过g00glez或RTFMingfind这个,但是有谁知道如何从命令行显示思科WAP无线(MAC地址)的MAC地址?

show version足以告诉我,我有2个无线电,一个FastEthernet接口,甚至给我的FastEthernet接口的MAC地址,但这完全没有关系到这些东西,由我们的无线调查,logging的MAC地址,由于明显的原因,有无线电的MAC地址,而不是有线连接。

重要的是,这些是1242 AG Aironet WAP( AIR-AP1242AG-A-K9 ),运行配套版本12.x K9 iOS。

由于聊天中有一只漂亮的袜子,我已经input了问题后find了答案。 显而易见的答案是show interfaces 。 好醇“。

  Hopless-WAP#sh int [...] Dot11Radio0 is up, line protocol is up Hardware is 802.11G Radio, address is feed.face.beef (bia beef.face.feed) MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set ARP type: ARPA, ARP Timeout 04:00:00 Last input 11:49:55, output 11:47:06, output hang never Last clearing of "show interface" counters never Input queue: 0/1127/0/0 (size/max/drops/flushes); Total output drops: 3611 Queueing strategy: fifo Output queue: 0/30 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec [...] 

也许你可以尝试

 show dot11 bssid 

我的输出是(多个SSIDconfiguration):

 Interface BSSID Guest SSID Dot11Radio1 0026.ca7a.1f80 Yes NLS-CORP-LAN Dot11Radio1 0026.ca7a.1f81 No NLS-TEMP1 Dot11Radio1 0026.ca7a.1f82 Yes NLS-WEP64 Dot11Radio1 0026.ca7a.1f83 Yes NLS-WPA-PSK Dot11Radio0 0026.cab5.9270 Yes NLS-CCJY Dot11Radio0 0026.cab5.9271 Yes NLS-CORP-LAN Dot11Radio0 0026.cab5.9272 Yes NLS-LEAP-TEST Dot11Radio0 0026.cab5.9273 No NLS-TEMP Dot11Radio0 0026.cab5.9274 No NLS-TEMP1 Dot11Radio0 0026.cab5.9275 Yes NLS-WEP64 Dot11Radio0 0026.cab5.9276 Yes NLS-WPA-PSK Dot11Radio0 0026.cab5.9277 Yes NLS-WPA2-AES Dot11Radio0 0026.cab5.9278 Yes NLS-WPA2-MIX 

下面的屏幕截图:

在这里输入图像说明