无法将卷标记为hpacucli（SmartArray P400i）

我有HP ProLiant G5硬件控制器HP SmartArray P400i 。 我从4个硬盘驱动器创build了逻辑驱动器，并安装了操作系统，但是我不知道这个卷是否被启动。 以下是HP SSA磁盘中hpacucli的输出：

 => ctrl slot=0 modify bootcontroller=enable => ctrl slot=0 id 1 modify bootvolume=primary Error: logicaldrive 1 cannot be set as the boot volume. Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. Reason: Not Appllicable => ctrl slot=0 show config Smart Array P400i in Slot 0 (Embedded) (sn: xxxxxxxxxx) Array A (SATA, Unused Space: 0MB) logicaldrive 1 (1.8 TB, RAID 1+0, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK) 

另外，逻辑驱动器types是Data 。
这里有什么问题？ 我怎样才能将逻辑卷标记为可启动？