我在两台不同的机器上安装了两个IBM ServeRAID M5014 SAS / SATA控制器卡。 一个报告驱动器温度，另一个不报告。 我在跳，这是我可以设置的某种types的megacli选项。 不过，我已经查看了整个megacli文档，没有任何提示，这是一个可configuration的选项。 有没有人有这些卡的经验，可以告诉我，如果固件升级将解决这种差异？ 目前正在工作（报告温度）的卡居住在其原生的IBM Systems Xconfiguration中，而除了报告温度之外当前正在运行的第二张卡不住在本地系统X机器中，而是更多地是… Frankenstein缺less更好的词汇。
作为另一个数据点，是否有人在非系统X机器上有这些卡中的一个报告温度？
以下是存档相关信息和有兴趣的人的转储。
首先，虽然这些卡都是M5014，但它们是不同的版本。 一个报告温度是：
Versions ================ Product Name : ServeRAID M5014 SAS/SATA Controller Serial No : SV13815228 FW Package Build: 12.12.0-0065 Mfg. Data ================ Mfg. Date : 09/17/11 Rework Date : 00/00/00 Revision No : 80B Battery FRU : N/A Image Versions in Flash: ================ FW Version : 2.120.143-1325 BIOS Version : 3.22.00_4.11.05.00_0x05060000 Preboot CLI Version: 04.04-017:#%00008 WebBIOS Version : 6.0-40-e_35-Rel NVDATA Version : 2.09.03-0020 Boot Block Version : 2.02.00.00-0000 BOOT Version : 09.250.01.219 Pending Images in Flash ================ None PCI Info ================ Controller Id : 0000 Vendor Id : 1000 Device Id : 0079 SubVendorId : 1014 SubDeviceId : 03c7 Host Interface : PCIE 而不报温度的是：
Versions ================ Product Name : ServeRAID M5014 SAS/SATA Controller Serial No : SV02102642 FW Package Build: 12.0.1-0097 Mfg. Data ================ Mfg. Date : 05/17/10 Rework Date : 00/00/00 Revision No : Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 3.09.00 FW Version : 2.0.33-0901 Preboot CLI Version: 02.00-015:#%00008 WebBIOS Version : 3.0-22-e_12-Rel NVDATA Version : 2.02.0043 Boot Block Version : 2.00.00.00-0018 BOOT Version : 01.250.04.219 Pending Images in Flash ================ None PCI Info ================ Controller Id : 0000 Vendor Id : 1000 Device Id : 0079 SubVendorId : 1014 SubDeviceId : 03c7 Host Interface : PCIE
探测驱动器温度导致：
sudo megacli -PDList -aALL -NoLog | grep -m1 "Drive Temperature" Drive Temperature :28C (82.40 F)
和
sudo megacli -PDList -aALL -NoLog | grep -m1 "Drive Temperature" Drive Temperature : N/A
进一步调查显示，第二张卡不支持温度。 从
sudo megacli -AdpAllInfo -aAll Supported PD Operations ================ Support Temperature : Yes
而第二张卡上没有启用。
Supported PD Operations ================ Support Temperature : No
以下是物理设备的详细信息：
卡＃1
Enclosure Device ID: 8 Slot Number: 8 Drive's postion: DiskGroup: 7, Span: 0, Arm: 0 Enclosure position: 1 Device Id: 19 WWN: 5000c5001130d3ca Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 1.364 TB [0xaea87b30 Sectors] Non Coerced Size: 1.363 TB [0xae987b30 Sectors] Coerced Size: 1.363 TB [0xae81a800 Sectors] Firmware state: Online, Spun Up Device Firmware Level: CC1H Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x500507603947ae49 Connected Port Number: 0(path0) Inquiry Data: 9VS1GZVVST31500341AS CC1H FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 3.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :35C (95.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a SMART alert : No
而第二张牌：
Enclosure Device ID: 252 Slot Number: 6 Drive's postion: DiskGroup: 6, Span: 0, Arm: 0 Enclosure position: N/A Device Id: 18 WWN: Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 1.364 TB [0xaea87b30 Sectors] Non Coerced Size: 1.363 TB [0xae987b30 Sectors] Coerced Size: 1.363 TB [0xae81a800 Sectors] Firmware state: Online, Spun Up Device Firmware Level: CC1J Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x4433221106000000 Connected Port Number: 4(path0) Inquiry Data: 9VS0FTMYST31500341AS CC1J FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 3.0Gb/s Link Speed: 3.0Gb/s Media Type: Hard Disk Device Drive Temperature : N/A PI Eligibility: No Drive is formatted for PI information: No PI: No PI Port-0 : Port status: Active Port's Linkspeed: 3.0Gb/s Drive has flagged a SMART alert : No
这里是“sudo megacli -AdpAllInfo -aAll”（diff <（sort card1.txt）<（sort card2.txt））的区别：
72d70 < Auto Enhanced Import : No 76c74 < Battery Warning : Enabled --- > Battery Warning : Disabled 83c81 < BIOS Version : 3.22.00_4.11.05.00_0x05060000 --- > BIOS Version : 3.09.00 85,87c83,84 < Boot Block Version : 2.02.00.00-0000 < BOOT Version : 09.250.01.219 < BreakMirror RAID Support : No --- > Boot Block Version : 2.00.00.00-0018 > BOOT Version : 01.250.04.219 94d90 < ChipRevision : B4 105,106c101,102 < Current Size of FW Cache : 145 MB < Current Time : 16:17:43 6/25, 2013 --- > Current Size of FW Cache : 0 MB > Current Time : 16:23:41 6/25, 2013 110c106 < Default spin down time in minutes: 30 --- > Default spin down time in minutes: 0 112c108 < Delay Among Spinup Groups : 2s --- > Delay Among Spinup Groups : 12s 131d126 < Disable Join Mirror : No 136c131 < Disable Spin Down of hot spares : Yes --- > Disable Spin Down of hot spares : No 139d133 < Don't Auto spin down Configured Drives 151,152c145 < Enable Shield State : No < Enable Spin Down of UnConfigured Drives : Yes --- > Enable Spin Down of UnConfigured Drives : No 166,167c159,160 < FW Package Build: 12.12.0-0065 < FW Version : 2.120.143-1325 --- > FW Package Build: 12.0.1-0097 > FW Version : 2.0.33-0901 186,187c179,180 < Max Drives to Spinup at One Time : 4 < Maximum number of direct attached drives to spin up in 1 min : 120 --- > Max Drives to Spinup at One Time : 2 > Maximum number of direct attached drives to spin up in 1 min : 0 192d184 < Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. 202c194 < Mfg. Date : 09/17/11 --- > Mfg. Date : 05/17/10 208c200 < NVDATA Version : 2.09.03-0020 --- > NVDATA Version : 2.02.0043 218c210 < Physical Devices : 10 --- > Physical Devices : 9 222c214 < Power Saving option : Don't spin down Hot spares --- > Power Saving option : All power saving options are enabled 226c218 < Preboot CLI Version: 04.04-017:#%00008 --- > Preboot CLI Version: 02.00-015:#%00008 241c233 < Revision No : 80B --- > Revision No : 243c235 < SAS Address : 500605b003b0c060 --- > SAS Address : 500605b00234f210 250c242 < Serial No : SV13815228 --- > Serial No : SV02102642 256c248 < Spin Down time : 30 --- > Spin Down time : 0 261c253 < Support Boot Time PFK Change : Yes --- > Support Boot Time PFK Change : No 271,272c263,264 < Support Temperature : Yes < Support the OCE without adding drives : Yes --- > Support Temperature : No > Support the OCE without adding drives : No 279d270 < TTY Log In Flash : No 288c279 < WebBIOS Version : 6.0-40-e_35-Rel --- > WebBIOS Version : 3.0-22-e_12-Rel
此问题已通过固件更新得到修复。 由于M5014卡不再驻留在IBM系统中，因此无法使用标准固件包对卡进行闪存。 为了完成固件更新，我使用LSI的9260-8i固件刷新了该卡。
请注意，如果您的固件在12.7.0-0020（IBM）之前，您需要先闪存到LSI的12.12.0-0090固件，然后才能刷新到更新的版本。 没有必要启动到DOS或创build一个复杂的USB拇指驱动器。 以下命令在Debian Wheezy上做了窍门
sudo megacli -adpfwflash -f the_rom_file.rom -a0
快乐RAID …