我们正在尝试使用DL360p G8升级DL360 G6 ESXi主机。 G6内有Qlogic ISP2532 FC卡，一切正常。 由于我没有备用的FC卡，因此我需要在新的服务器中使用相同的卡。
我遇到的问题是，虽然卡似乎在新的服务器上正常工作，我没有看到存储。 整个SAN / FC交换机不在我的手中，我无法访问它。
我不是SAN专家，但我认为这不重要。 显然这个卡是一样的，WNN是相同的，所以理论上这不应该影响交换机上的分区configuration。
如果我将FC卡移回到旧服务器中，它可以正常工作，我可以看到存储。 这是内核在新服务器上显示的内容（当它不工作时）：
2016-04-11T13:36:25.937Z cpu7:33267)Loading module qlnativefc ... 2016-04-11T13:36:25.941Z cpu7:33267)Elf: 1865: module qlnativefc has license GPLv2 2016-04-11T13:36:25.979Z cpu7:33267)Device: 191: Registered driver 'qlnativefc' from 20 2016-04-11T13:36:25.979Z cpu7:33267)Mod: 4943: Initialization of qlnativefc succeeded with module ID 20. 2016-04-11T13:36:25.979Z cpu7:33267)qlnativefc loaded successfully. 2016-04-11T13:36:25.981Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): MSI-X vector count from config space: 1f 2016-04-11T13:36:25.981Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): MSI-X vector count usable: 2 2016-04-11T13:36:25.981Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Found an ISP2532, iobase 0x0x41000a200000 2016-04-11T13:36:25.981Z cpu16:33266)IntrCookie: 1915: cookie 0x14 moduleID 20 <qlnativefc (default)0> exclusive, flags 0x1d 2016-04-11T13:36:25.981Z cpu16:33266)IntrCookie: 1915: cookie 0x15 moduleID 20 <qlnativefc (rsp_q)0> exclusive, flags 0x1d 2016-04-11T13:36:25.981Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): num_rsp_queues = 1, num_req_queues = 1 2016-04-11T13:36:25.981Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): MSI-X: Enabled (0x2, 0x0). 2016-04-11T13:36:25.981Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Calling initialize adapter 2016-04-11T13:36:28.941Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): FW: Loading via request-firmware... 2016-04-11T13:36:29.039Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Allocated (64 KB) for EFT... 2016-04-11T13:36:29.042Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Allocated (5414 KB) for firmware dump... 2016-04-11T13:36:29.054Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Setting Parameter to mark RDP ELS command as a passthrough ELS command 2016-04-11T13:36:29.066Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Enabling PUREX. 2016-04-11T13:36:29.078Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): FAWWN feature : disabled. 2016-04-11T13:36:29.091Z cpu16:33266)qlnativefc: (7:0.0): scsi(0): Unable to read FCP priority data. 2016-04-11T13:36:29.101Z cpu16:33266)Device: 326: Found driver qlnativefc for device 0x74b0430275473f33 2016-04-11T13:36:29.103Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): MSI-X vector count from config space: 1f 2016-04-11T13:36:29.103Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): MSI-X vector count usable: 2 2016-04-11T13:36:29.103Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Found an ISP2532, iobase 0x0x41000a1b8000 2016-04-11T13:36:29.103Z cpu16:33266)IntrCookie: 1915: cookie 0x16 moduleID 20 <qlnativefc (default)1> exclusive, flags 0x1d 2016-04-11T13:36:29.103Z cpu16:33266)IntrCookie: 1915: cookie 0x17 moduleID 20 <qlnativefc (rsp_q)1> exclusive, flags 0x1d 2016-04-11T13:36:29.103Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): num_rsp_queues = 1, num_req_queues = 1 2016-04-11T13:36:29.103Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): MSI-X: Enabled (0x2, 0x0). 2016-04-11T13:36:29.103Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Calling initialize adapter 2016-04-11T13:36:30.053Z cpu0:33098)qlnativefc: (7:0.0): scsi(0): LOOP UP detected (4 Gbps). 2016-04-11T13:36:30.226Z cpu2:33269)qlnativefc: (7:0.0): scsi(0): SNS scan failed -- assuming zero-entry result... 2016-04-11T13:36:31.698Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): FW: Loading via request-firmware... 2016-04-11T13:36:31.796Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Allocated (64 KB) for EFT... 2016-04-11T13:36:31.798Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Allocated (5414 KB) for firmware dump... 2016-04-11T13:36:31.811Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Setting Parameter to mark RDP ELS command as a passthrough ELS command 2016-04-11T13:36:31.823Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Enabling PUREX. 2016-04-11T13:36:31.835Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): FAWWN feature : disabled. 2016-04-11T13:36:31.847Z cpu16:33266)qlnativefc: (7:0.1): scsi(1): Unable to read FCP priority data. 2016-04-11T13:36:31.860Z cpu16:33266)Device: 326: Found driver qlnativefc for device 0x6eeb43027547401e 2016-04-11T13:36:32.812Z cpu2:33100)qlnativefc: (7:0.1): scsi(1): LOOP UP detected (4 Gbps). 2016-04-11T13:36:33.234Z cpu10:33271)qlnativefc: (7:0.1): scsi(1): SNS scan failed -- assuming zero-entry result... 有人向我build议，分区与服务器名称有某种关系，我应该更改新服务器的名称以反映旧服务器的名称。 我不知道这是如何与任何事情有关，但在最后一次尝试中，我更改了ESXi主机名。 它没有帮助。
有什么我失踪？ 交换机上的分区configuration是否必须重做？ 如果是这样，为什么？
任何帮助表示赞赏。
问候，斯蒂芬