snmpwalk报告中的许多错误行

设备：Cisco SG 300交换机/ Ubuntu 14.04 LTS

当我运行一个snmpwalk时，在实际请求的数据之前，我得到了许多错误行。

例：

snmpwalk -v3 -u public 192.168.0.20 IF-MIB::ifHighSpeed Unlinked OID in IPATM-IPMC-MIB: marsMIB ::= { mib-2 57 } Undefined identifier: mib-2 near line 18 of /usr/share/mibs/ietf/IPATM-IPMC-MIB Bad operator (INTEGER): At line 73 in /usr/share/mibs/ietf/SNMPv2-PDU Expected "::=" (RFC5644): At line 493 in /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB Expected "{" (EOF): At line 651 in /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB Bad object identifier: At line 651 in /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB Bad parse of OBJECT-IDENTITY: At line 651 in /usr/share/mibs/iana/IANA-IPPM-METRICS-REGISTRY-MIB Timestamp should end with Z (201010310000a): At line 16 in /usr/share/snmp/mibs/CISCOSBsysmng.mib Timestamp should end with Z (201010310000a): At line 29 in /usr/share/snmp/mibs/CISCOSBsysmng.mib Should be ACCESS ((): At line 575 in /usr/share/snmp/mibs/CISCOSBsnmp.mib Bad parse of OBJECT-TYPE: At line 575 in /usr/share/snmp/mibs/CISCOSBsnmp.mib IF-MIB::ifHighSpeed.49 = Gauge32: 100 IF-MIB::ifHighSpeed.50 = Gauge32: 1000 IF-MIB::ifHighSpeed.51 = Gauge32: 1000 IF-MIB::ifHighSpeed.52 = Gauge32: 1000 IF-MIB::ifHighSpeed.53 = Gauge32: 1000 IF-MIB::ifHighSpeed.54 = Gauge32: 1000 IF-MIB::ifHighSpeed.55 = Gauge32: 1000 IF-MIB::ifHighSpeed.56 = Gauge32: 1000 IF-MIB::ifHighSpeed.57 = Gauge32: 1000 IF-MIB::ifHighSpeed.58 = Gauge32: 1000 IF-MIB::ifHighSpeed.1000 = Gauge32: 0 IF-MIB::ifHighSpeed.1001 = Gauge32: 0 IF-MIB::ifHighSpeed.1002 = Gauge32: 0 IF-MIB::ifHighSpeed.1003 = Gauge32: 0 IF-MIB::ifHighSpeed.1004 = Gauge32: 0 IF-MIB::ifHighSpeed.1005 = Gauge32: 0 IF-MIB::ifHighSpeed.1006 = Gauge32: 0 IF-MIB::ifHighSpeed.1007 = Gauge32: 0 IF-MIB::ifHighSpeed.3000 = Gauge32: 0 IF-MIB::ifHighSpeed.7000 = Gauge32: 100 IF-MIB::ifHighSpeed.20000 = Gauge32: 0 IF-MIB::ifHighSpeed.100000 = Gauge32: 0 IF-MIB::ifHighSpeed.300000 = Gauge32: 0 

我使用一个非常简单的设置：

• SCCM 2012 R2 OSD pxe-32：tftp打开超时
• 如何设置一个简单的思科ISGconfiguration来控制互联网访问
• 连接问题通过MPLS到主机
• 远程WOL通过CISCO / FW不转发
• CISCO SSL VPN（多站点）

 sudo apt-get install snmp sudo apt-get install snmp-mibs-downloader sudo gedit /etc/snmp/snmp.conf ( I comment out the 'mibs :' line ) sudo download-mibs ( I download the device MIBs, extract it and CD in ) sudo cp -R * /usr/share/snmp/mibs/ sudo bash -c 'echo "mibs ALL" >> /etc/snmp/snmp.conf' 

为什么我会得到所有这些错误？ 如果它是随便的，不可避免的，有没有办法让他们跳过报告？ （snmpwalk -Pe不会跳过它们，即：snmpwalk -Pe -v3 -u public 192.168.0.20 IF-MIB :: ifHighSpeed）