SSH不能通过IPSec隧道（Strongswan）

我在云虚拟机上configuration了一个小型networking。这个虚拟机有一个分配给eth0接口的静态IP地址，我将叫$ EXTIP。 mydomain.com指向$ EXTIP。里面，我有一些Linux容器，通过在子网10.0.0.0/24（我称为虚拟接口nat ）通过DHCP获得他们的IP。他们运行一些可以通过DNAT达到的服务。然后我想通过IPSec隧道连接到这些容器，所以我configuration了StrongSwan。

ipsec.conf文件：

conn %default dpdaction=none rekey=no conn remote keyexchange=ikev2 ike=######## left=[$EXTIP] leftsubnet=10.0.1.0/24,10.0.0.0/24 leftauth=pubkey lefthostaccess=yes leftcert=########.pem leftfirewall=yes leftid="#########" right=%any rightsourceip=10.0.1.0/24 rightauth=######## rightid=%any rightsendcert=never eap_identity=%any auto=add type=tunnel

一切工作正常，IPSec客户端获得10.0.1.0/24子网的IP，并可以到达容器子网。我的问题是，我无法通过隧道获得SSH连接。它根本不工作，SSH客户端不会产生任何输出。用tcpdump嗅探给出：

tcpdump的：

 09:50:29.648206 ARP, Request who-has 10.0.0.1 tell mydomain.com, length 28 09:50:29.648246 ARP, Reply 10.0.0.1 is-at 00:ff:aa:00:00:01 (oui Unknown), length 28 09:50:29.648253 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [S], seq 4007849772, win 29200, options [mss 1460,sackOK,TS val 1151153 ecr 0,nop,wscale 7], length 0 09:50:29.648296 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [S.], seq 2809522632, ack 4007849773, win 14480, options [mss 1460,sackOK,TS val 11482992 ecr 1151153,nop,wscale 6], length 0 09:50:29.677225 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 2809522633, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 0 09:50:29.679370 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 0:23, ack 1, win 229, options [nop,nop,TS val 1151162 ecr 11482992], length 23 09:50:29.679403 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483002 ecr 1151162], length 0 09:50:29.684337 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1:32, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 31 09:50:29.685471 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1448 09:50:29.685519 IP mydomain.com > 10.0.0.1: ICMP mydomain.com unreachable - need to frag (mtu 1422), length 556 09:50:29.685567 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 32:1402, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 1370 09:50:29.685572 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], seq 1402:1480, ack 24, win 227, options [nop,nop,TS val 11483003 ecr 1151162], length 78 09:50:29.714601 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 32, win 229, options [nop,nop,TS val 1151173 ecr 11483003], length 0 09:50:29.714642 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483012 ecr 1151173], length 120 09:50:29.723649 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [P.], seq 1393:1959, ack 32, win 229, options [nop,nop,TS val 1151174 ecr 11483003], length 566 09:50:29.723677 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [.], ack 24, win 227, options [nop,nop,TS val 11483015 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 0 09:50:29.725688 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1480, win 251, options [nop,nop,TS val 1151177 ecr 11483003], length 0 09:50:29.952394 IP 10.0.0.1.ssh > 10.0.1.2.54869: Flags [P.], seq 1480:1600, ack 24, win 227, options [nop,nop,TS val 11483084 ecr 1151173,nop,nop,sack 1 {1394:1960}], length 120 09:50:29.981056 IP mydomain.com.54869 > 10.0.0.1.ssh: Flags [.], ack 1600, win 251, options [nop,nop,TS val 1151253 ecr 11483084,nop,nop,sack 1 {1480:1600}], length 0

如果你需要它，这是我的iptablesconfiguration文件：

iptables的：

 *filter :INPUT ACCEPT [144:9669] :FORWARD DROP [0:0] :OUTPUT ACCEPT [97:15649] :interfacce-trusted - [0:0] :porte-trusted - [0:0] -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -j interfacce-trusted -A FORWARD -j porte-trusted -A FORWARD -j REJECT --reject-with icmp-host-unreachable -A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A interfacce-trusted -i nat -j ACCEPT -A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 80 -j ACCEPT -A porte-trusted -d 10.0.0.1/32 -p tcp -m tcp --dport 443 -j ACCEPT -A porte-trusted -d 10.0.0.3/32 -p tcp -m tcp --dport 1234 -j ACCEPT COMMIT *nat :PREROUTING ACCEPT [10:600] :INPUT ACCEPT [10:600] :OUTPUT ACCEPT [4:268] :POSTROUTING ACCEPT [18:1108] -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1:80 -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 443 -j DNAT --to-destination 10.0.0.1:443 -A PREROUTING -d [$EXTIP] -p tcp -m tcp --dport 8069 -j DNAT --to-destination 10.0.0.3:1234 -A POSTROUTING -s 10.0.0.0/24 -o eth0 -m policy --dir out --pol ipsec -j ACCEPT -A POSTROUTING -s 10.0.1.0/24 -o nat -j MASQUERADE -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE COMMIT

大概我失去了一些愚蠢的…预先感谢帮助:)）

问题是数据包碎片。在mangle表中pipe理MSS的简单规则我解决了我的问题:)

 iptables -t mangle -A FORWARD -o eth0 -p tcp -m tcp --tcp-flags SYN,RST SYN -m tcpmss --mss 1361:1536 -j TCPMSS --set-mss 1360