我有一台服务器（运行OEL / RHEL5的hp x86刀片），在lvm.conf中configuration了错误的lvmfilter
filter = ["a|^/dev/emcpower.*|", "r/.*/"] 我们也使用了cciss设备，所以应该在/ dev / cciss中为他们提供一个接受声明。 迄今为止，这种疏忽尚未引起问题。 “系统”分区（例如/ var，/ home等）不在卷组中，而只在磁盘上。
但是'/'mount和交换空间都是在LVM卷组上configuration的，卷组由lvmfilter拒绝。
服务器似乎工作正常，但这怎么可能？
安装输出
/dev/mapper/VolGroup01-LogVol00 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/cciss/c0d0p8 on /home type ext3 (rw) /dev/cciss/c0d0p7 on /opt type ext3 (rw) /dev/cciss/c0d0p6 on /var type ext3 (rw) /dev/cciss/c0d0p5 on /tmp type ext3 (rw) /dev/cciss/c0d0p3 on /usr type ext3 (rw) /dev/cciss/c0d0p2 on /temp type ext3 (rw) /dev/cciss/c0d0p1 on /boot type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) nfsd on /proc/fs/nfsd type nfsd (rw)
从/ etc / fstab
/dev/VolGroup01/LogVol00 / ext3 defaults 1 1 LABEL=/home /home ext3 defaults 1 2 LABEL=/opt /opt ext3 defaults 1 2 LABEL=/var /var ext3 defaults 1 2 LABEL=/tmp /tmp ext3 defaults 1 2 LABEL=/usr /usr ext3 defaults 1 2 LABEL=/temp /temp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup01/LogVol01 swap swap defaults 0 0 /dev/VolGroup01/LogVol02 swap swap defaults 0 0 ...
磁盘的标签
[user@host~]$ ls -al /dev/disk/by-label/ total 0 drwxr-xr-x 2 root root 180 Apr 12 19:23 . drwxr-xr-x 6 root root 120 Apr 12 19:23 .. lrwxrwxrwx 1 root root 18 Apr 12 19:23 boot -> ../../cciss/c0d0p1 lrwxrwxrwx 1 root root 18 Apr 12 19:23 home -> ../../cciss/c0d0p8 lrwxrwxrwx 1 root root 18 Apr 12 19:23 opt -> ../../cciss/c0d0p7 lrwxrwxrwx 1 root root 18 Apr 12 19:23 temp -> ../../cciss/c0d0p2 lrwxrwxrwx 1 root root 18 Apr 12 19:23 tmp -> ../../cciss/c0d0p5 lrwxrwxrwx 1 root root 18 Apr 12 19:23 usr -> ../../cciss/c0d0p3 lrwxrwxrwx 1 root root 18 Apr 12 19:23 var -> ../../cciss/c0d0p6
的vgdisplay
[user@host ~]$ sudo vgdisplay -v VolGroup01 Using volume group(s) on command line Finding volume group "VolGroup01" Wiping cache of LVM-capable devices Volume group "VolGroup01" not found
dev映射器
[user@host ~]$ ls -al /dev/mapper/VolGroup0* brw------- 1 root root 253, 0 Apr 12 19:23 /dev/mapper/VolGroup01-LogVol00 brw------- 1 root root 253, 1 Apr 12 19:23 /dev/mapper/VolGroup01-LogVol01 brw------- 1 root root 253, 2 Apr 12 19:23 /dev/mapper/VolGroup01-LogVol02
swapon命令
[user@host ~]$ swapon -s Filename Type Size Used Priority /dev/mapper/VolGroup01-LogVol01 partition 18481144 1860804-1 /dev/mapper/VolGroup01-LogVol02 partition 18874360 0 -2
在/ etc / lvm的/备份/ VolGroup01
VolGroup01 { id = "KtRbKi-wZ8l-rsgg-LyoT-edcO-2Nzo-qsDmaK" seqno = 4 status = ["RESIZEABLE", "READ", "WRITE"] flags = [] extent_size = 65536 # 32 Megabytes max_lv = 0 max_pv = 0 physical_volumes { pv0 { id = "H9ludV-lTJK-ivK1-HcUf-G8KR-krD9-TsNJrp" device = "/dev/cciss/c0d0p9" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 93964122 # 44.8056 Gigabytes pe_start = 384 pe_count = 1433 # 44.7812 Gigabytes } } logical_volumes { LogVol00 { id = "1P5pnt-jFXu-ec4f-NfWC-q9jx-CRGc-33lyPd" status = ["READ", "WRITE", "VISIBLE"] flags = [] segment_count = 1 segment1 { start_extent = 0 extent_count = 125 # 3.90625 Gigabytes type = "striped" stripe_count = 1 # linear stripes = [ "pv0", 0 ] } } LogVol01 { id = "dvqggw-JflJ-KC9Y-QEhw-pejq-GgIv-taDNzj" status = ["READ", "WRITE", "VISIBLE"] flags = [] segment_count = 1 segment1 { start_extent = 0 extent_count = 564 # 17.625 Gigabytes type = "striped" stripe_count = 1 # linear stripes = [ "pv0", 125 ] } } LogVol02 { id = "ZDTUSD-ItMw-xxBK-l1Le-DYX7-J4i3-UYKN4Q" status = ["READ", "WRITE", "VISIBLE"] flags = [] segment_count = 1 segment1 { start_extent = 0 extent_count = 576 # 18 Gigabytes type = "striped" stripe_count = 1 # linear stripes = [ "pv0", 689 ] } } } }
由于initrd具有较旧的lvm.conf而没有错误的filter，所以LV仍在启动时挂载。 新的filter将阻止LVM命令的工作，但不会破坏已经挂载的LV。
当你更新你的内核时，initrd将会用你当前的lvm.conf进行更新，所以确保你在这之前修复了这个filter。