我用Perc 5 / ireplace了一个失效的电池。 原装和replace是相同的DLU8735型号。 手册中找不到任何特殊的电池更换程序，因此我只是closures了系统并将其更换。 安装更换电池后， GetBbuStatus开始显示电池丢失。 GetBbuCapacityInfo将其显示为充电，所以我可能需要在电池被使用之前完成。 然而，它现在是100％的收费，但仍然报失踪。 我想也许我需要强制一个学习循环，但是这个状态瞬间完成，没有改变。 系统没有保修，所以我不能打电话给戴尔。 任何想法为什么这个电池被看到还没有使用？
lspci | grep RAID
02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5 MegaCli64 -AdpBbuCmd -BbuLearn -aALL
Adapter 0: BBU Learn Succeeded. Exit Code: 0x00
MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL
BBU status for Adapter: 0 BatteryType: No Battery Battery State: Missing Exit Code: 0x00
MegaCli64 -AdpBbuCmd -GetBbuCapacityInfo -aALL
BBU Capacity Info for Adapter: 0 Relative State of Charge: 100 % Absolute State of charge: 100 % Remaining Capacity: 1897 mAh Full Charge Capacity: 1900 mAh Run time to empty: Battery is not being charged. Average time to empty: Battery is not being charged. Estimated Time to full recharge: Battery is not being charged. Cycle Count: 0 Max Error = 0 % Remaining Capacity Alarm = 190 mAh Remining Time Alarm = 10 Min Exit Code: 0x00
MegaCli64 -AdpBbuCmd -GetBbuDesignInfo -aALL
BBU Design Info for Adapter: 0 Date of Manufacture: 11/15, 2007 Design Capacity: 1900 mAh Design Voltage: 3700 mV Specification Info: 49 Serial Number: 4471 Pack Stat Configuration: 0xe4bc Manufacture Name: SANYO Firmware Version : Device Name: DLU8735 Device Chemistry: LION Battery FRU: N/A Transparent Learn = 0 App Data = 0 Exit Code: 0x00
MegaCli64 -AdpBbuCmd -GetBbuProperties -aALL
BBU Properties for Adapter: 0 Auto Learn Period: 90 Days Next Learn time: Sat Jan 1 00:00:00 2000 Learn Delay Interval:0 Hours Auto-Learn Mode: Enabled Exit Code: 0x00
听起来你有一个不好的联系。 其他人在用压缩空气吹出RAID电池插头和sockets后报告成功。
如果这不起作用，您将需要尝试更换PERC 5 / i（在2014年初在良好使用条件下的成本低于20美元）和/或尝试使用另一个电池。