CentOS未检测到Intel 10G（ixgbe）接口

我有一个服务器与CentOS 6.5安装了2个1Gbps以太网卡，我已经添加了一个新的接口（英特尔（R）10千兆位PCI Expressnetworking），但问题。 系统是不是用（ ifconfig -a ）或（ ifcfg-ethX ）文件检测以太网信息。

我已经尝试了以下内容：

• ifconfig -a ：不显示新的NIC信息或MAC。
• 删除/etc/udev/rules.d/70-persistent-net.rules并重新启动。

• 试图用真正的HwAddr做一个新的ifcfg-eth2文件，但仍然显示：

    Bringing up interface eth2: Device eth2 does not seem to be present, delaying initialization. [FAILED] 

• rmmod ixgbe; modprobe ixgbe

• dmesg输出：

  • 无法从LVM2 raid1镜像中删除有问题的设备
  • HP ProLiant Gen8运行状况代理和EL6.x – cpqHoMibHealthStatusArray已更改为值：x
  • 如何挑选供应商
  • 如何在没有root权限的Linux上find系统制造商/型号？
  • 针对低延迟UDPnetworking的硬件/拓扑build议

   ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k ixgbe: Copyright (c) 1999-2013 Intel Corporation. ixgbe 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ixgbe 0000:03:00.0: setting latency timer to 64 ixgbe 0000:03:00.0: The EEPROM Checksum Is Not Valid ixgbe 0000:03:00.0: PCI INT A disabled ixgbe: probe of 0000:03:00.0 failed with error -5 ixgbe 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ixgbe 0000:03:00.1: setting latency timer to 64 ixgbe 0000:03:00.1: The EEPROM Checksum Is Not Valid ixgbe 0000:03:00.1: PCI INT B disabled ixgbe: probe of 0000:03:00.1 failed with error -5 

这些都不起作用。 但我相信如果我格式化/重新安装操作系统，它将完美的工作。 我以前的服务器有同样的问题。 我怎样才能解决这个问题，而无需重新安装操作系统？

注意：这是在另一个新安装的CentOS 6.5服务器上工作的相同的NIC模型：dmesg输出：

 ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.15.1-k ixgbe: Copyright (c) 1999-2013 Intel Corporation. ixgbe 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ixgbe 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 39 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 39 for MSI/MSI-X alloc irq_desc for 40 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 40 for MSI/MSI-X alloc irq_desc for 41 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 41 for MSI/MSI-X alloc irq_desc for 42 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 42 for MSI/MSI-X alloc irq_desc for 43 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 43 for MSI/MSI-X alloc irq_desc for 44 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 44 for MSI/MSI-X alloc irq_desc for 45 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 45 for MSI/MSI-X alloc irq_desc for 46 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 46 for MSI/MSI-X alloc irq_desc for 47 on node -1 alloc kstat_irqs on node -1 ixgbe 0000:03:00.0: irq 47 for MSI/MSI-X ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 ixgbe 0000:03:00.0: (PCI Express:2.5GT/s:Width x8) 00:1b:21:69:89:61 ixgbe 0000:03:00.0: MAC: 1, PHY: 5, PBA No: E18269-001 ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection 

这里是e1000的参数关于允许错误的校验和没有parm！ [root @ tv〜] #modinfo e1000 | grep parm

 parm: TxDescriptors:Number of transmit descriptors (array of int) parm: RxDescriptors:Number of receive descriptors (array of int) parm: Speed:Speed setting (array of int) parm: Duplex:Duplex setting (array of int) parm: AutoNeg:Advertised auto-negotiation setting (array of int) parm: FlowControl:Flow Control setting (array of int) parm: XsumRX:Disable or enable Receive Checksum offload (array of int) parm: TxIntDelay:Transmit Interrupt Delay (array of int) parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int) parm: RxIntDelay:Receive Interrupt Delay (array of int) parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int) parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int) parm: SmartPowerDownEnable:Enable PHY smart power down (array of int) parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int) parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint) parm: debug:Debug level (0=none,...,16=all) (int)